Best Grease for Ball Joints

Are you looking for the best grease for ball joints? There are many versatile options on the market. But not all of them are strong, long-lasting, and budget-friendly.

So for a perfect grease gun, you need to consider some basic features. For example, the ability to withstand high temperature and pressure, high viscosity, excellent lubricating potential, etc.

Is it hard to find? Why are we here! We’ll give you some of the best choices and a helpful buying guide. In our following discussion, you will find some tips and tricks too.

You may notice some unwanted sounds or vibrations while driving or taking turns. Well, it happens because the grease ball is out at the joints. Over time, the lack of grease can erode the ball joints.

Even low-quality grease or lubricants do the same to one of the most expensive and complicated sections. For this reason, you must lubricate your ball joints regularly.

So now, let’s get into the main topic.

Review of 8 Best Grease for Ball Joints in 2022

Here is the list of some best greases that we have sincerely reviewed. So check them out!

01. Lucas Best Heavy Duty Grease Oil

We start our Best Ball Joint Grease list with Heavy-duty grease from Lucas. The company is already being famous for its quality product. This grease is not anything different.

If you have a heavy-duty vehicle that runs regularly, you need long-lasting grease. That’s what Lucas oil does. According to customers, it runs 4 times longer than average ones. That saves a fortune there. You don’t have to apple again and again.

Also, the temperature is a crucial factor when choosing good grease for the ball joint. This heavy-duty grease can tolerate a wide range of temperature limits. It won’t get hard during the cold or start dripping during summer.

Semi water-resistant means a splash of water cannot wipe it out. So, take your vehicle through the water to run during rain; there is no risk of your wheel bearing getting ruined.

So, if you are a heavy vehicle owner that runs regularly, we recommend you try this one.

Pros:

1. More stable than other lubes,
2. Water-resistant,
3. Tolerant to a higher or lower temperature,
4. Multipurpose uses- for ball joints, wheel bearing, etc.,
5. Suitable for high-speed ball joints

Cons:

1. Honestly, there aren’t many negative things to talk about. Customers seem pretty satisfied with the quality.

---

02. Plews & Edelmann- Heavy Duty Mini Grease Gun

Next, we have this ball joint lubricant from Plews & Edelmann, one of the best for corrosion control. And we agree to that.

The first thing that makes this one special is its water-resistibility. Its water resistance is so high that you can use it for any marine or high-performance water vehicle. It is indeed a rare quality among greases and lubricants.

The particular calcium sulfonate complex gives the grease some exceptional benefits. This water-insoluble formula is suitable not only for marine water but also for others. It can withstand any adverse condition, whether underwater or in the air.

Its high-temperature tolerance will let you keep your ball joints corrosion free even in the hottest area, such as Florida. It can take up to 550 degrees F, which is quite impressive. Also, it will give you durability against others.

All the great qualities ensure your vehicle’s great functionality and smooth ball joint operation.

Pros:

1. Higher temperature dropping point, 350 degrees F,
2. Compatible with most lubricants such as Lithium,
3. Serves for a longer time,
4. Can withstand a great deal of saltiness in water,
5. Has higher tolerance of adverse conditions.

Cons:

1. The stickiness makes it challenging to apply.

---

03. Valvoline Full Synthetic Grease- Best Option for Moog Ball Joint

We now bring the best grease for Moog ball joints to you because we know that is something everyone needs. Don’t worry; Valvoline has brought this excellent grease gun, one of their many wonders.

This lithium-based grease used lithium-complex as its thickener. This means durability is one of its many traits. So, you don’t have to worry about greasing every now and then.

Again, as the name suggests, it has high-quality additives like Moly or Molybdenum disulfide. We know excessive moly can make the grease sticky. That’s why the manufacturer ensured only 2.5% of it. Just the right amount to make the grease perfect.

Like any good grease, it can tolerate extreme heat and pressure. This is a very convenient point for driving heavy-duty vehicles in remote areas. Also, the water resistance lets your vehicle through waters and rains, and your joints will still be rocking.

Pros:

1. Higher durability because of lithium-complex,
2. Higher waterproofing,
3. Reduced dripping in higher temperatures,
4. Reduces corrosion and wear,
5. Higher stability,
6. Compatible with most other lubes.

Cons:

1. The price could be a little lower.

---

04. Sta-Lube Grease- Best Water Resistant Item

Are you finding something for your suffering boat? Do you need good water-resistant marine grease? Well, you are in the right place then. We bring you the best water-resistant grease for your favorite vehicle.

First, let it be clear that this fantastic product is versatile in its use. We don’t mean only water-based vehicles when we say corrosion-resistant marine grease. It can be used smoothly for any part of any material. So, it saves a lot of money there as you don’t have to buy different grease for different purposes.

This grease is based on Aluminum-complex, which means it has higher viscosity-based oil. As a result, it provides super protection. Also, this complex is responsible for protection against dust and oxidation. Simply, your ball joints will be good as new.

Like we said before, this multipurpose grease can be used in your trailer course, guiding frameworks, O-rings and U-joints, and more.

Pros:

1. Versatile on use,
2. High water insolubility and friction resistance,
3. Higher durability,
4. Environment-friendly,
5. Can tolerate extreme conditions,
6. Higher viscosity.

Cons:

1. It could be a little thicker.

---

05. Mobil Synthetic Grease Gun- Best Automotive Grease

 It is time for lithium grease for ball joints for your trucks, vehicles, or even trailer at this point in our list. Its classic grease can be considered multipurpose as it is suitable for both chassis applications and wheel bearing.

It has a lithium-complex agent, a versatile lube for meta-to-metal applications. Having higher complexity is just the right thing for automotive equipment.

Just like any excellent grease, it is temperature tolerant. This automotive grease can tolerate a -40 to 302 degrees Fahrenheit temperature. So, now you can take your truck or trailer anywhere, anytime.

The detailing of this product for critical appendages is very praiseworthy. That is why its popularity is increasing among heavy automobile owners. This mini grease gun is oxidation resistant and also runs for longer.

We say, why not give it a go.

Pros:

1. Higher stability and temperature tolerance,
2. Versatile usage,
3. Strong enough to last longer,
4. Suitable for all kinds of automobile vehicles,
5. Reputed company for producing high-quality synthetic grease.

Cons:

1. Sometimes it may leak into the storage.

---

06. Lucas- Standard Duty High-Speed Bearings Grease

Here we are, with another Lucas oil, because it is simply one of the best grease manufacturers and lubes for metal-to-metal or even metal-to-plastic applications.

The temperature comes to mind when you search for grease for heavy-duty equipment. Lucas Oil is known for its notorious temperature-tolerant grease. If you live in Florida or Arizona, this one suits your vehicle just fine. Let us remind you this grease can take temperature up to 110 degrees F.

The correct thickness looks after your equipment’s well-being and is easy to apply. In this regard, more and more customers are leaning towards this one.

Also, there will be no dripping or spillage problem, so the loss of grease is out of the question. It ensures durability and frees you from spending more on grease.

Pros:

1. Compatible with a wide range of applications and tools,
2. Compatible with meta-to-plastic applications, so no harms to plastics,
3. High water and temperature resistance,
4. Long-lasting,
5. Suitable for any high-speed bearing,
6. Reduced dripping and spillage.

Cons:

1. Nothing much wrong with the products but the tubes is sometimes bent.

---

07. Valvoline Red- Best Grease for U Joints

Valvoline Red Grease is known for its specialty in U-joints and ball joints. Its synthetic grease is well-capable for taking care of any kind of heavy loading equipment and a wide range of applications.

This one is a multi-vehicle long-lasting lube that can tolerate higher temperatures and pressure. The manufacturer claims it can lubricate at up to 375 degrees F. It is provided with a lithium complex EP containing antioxidants that protect from oxidation. Also, it has anti-ware additives and anti-pressure properties. Basically, it literally has everything you can ask for in grease.

Because of the longevity, you don’t need to spend bucks after grease and lubes. With this grease in your vehicle, forget about spillage even in the highest temperatures.

Pros:

1. High-quality grease with higher temperature resistance,
2. Tried and tested against extreme pressure,
3. More excellent stability makes it suitable for u Joints,
4. Waterproof and anti-ware properties,
5. Doesn’t get washed away easily.

Cons:

1. The packaging should have been better.

---

08. Red Line Synthetic Lubricant- High-Performance Grease For CV-joints

We end our review with another superb Synthetic Grease- another high-temperature tolerant grease for your equipment.

Usually, the CV joints or constant velocity joints are very high maintenance joints that need high-quality grease. For that reason, there is nothing better than Red Line Synthetic grease.

Its antioxidant, anti-corrosion, and anti-wear properties stand out among similar products. The water resistance is so high that it can get through any water level without the fear of washing off.

It also includes a moly compound, which significantly increases its temperature and pressure tolerance. It helps the grease stick to the joints and makes a coat around. So the corrosion because of friction is reduced.

The dropping point is very high; -100 degrees to 500 degrees F. No other grease can compete with this in this regard.

We say it will be a good fit for all your equipment.

Pros:

• High-performance premium grade grease,
• Multipurpose,
• Antioxidant, anti-corrosion, and anti-wear properties,
• Higher water resistance,
• Higher dropping point.

Cons:

• Not compatible enough with other grease and lubes.

---

What Are the Components of a Grease?

Standard automotive grease is composed of:

Grease = BASE OIL (80-90%) + THICKENER (2-20%) + ADDITIVES (0-15%)

The base oil provides the lubrication.

The thickener comprises components without or based on metal soaps that hold the base oil in place.

The additives improve the lubricant’s performance to minimize friction, wear, rust, corrosion, oxidation, etc.

1. BASE OIL

As we have seen, about 80-90% of Greece contains base oil. It provides the necessary lubrication to reduce friction. Its viscosity (resistance to a liquid flow) is the main reason for the choice of products.

Indeed in some cases, it is THE determining factor for the choice itself. The base oil can be mineral (90%), synthetic, and/or sometimes biodegradable.

2. THICKENER

It is necessary to imagine the fat as if it were a sponge to understand how a thickener works. Thanks to the chemical-physical forces of attraction, the thickeners form a three-dimensional matrix whose free pores are filled with the base oil.

The consistency of the grease depends precisely on the quantity and type of thickener used. The more consistent grease thickener, the less grease thickener and the more fluid.

3. ADDITIVES

Additives are mainly organic or inorganic substances dissolved in grease or lubricants. They have some important roles to play.

They increase the properties of previously put grease, such as anti-corrosion, antioxidant, anti-foam, etc. Additives also add some new properties like higher extreme pressure and water resistance.

What Is Synthetic Grease?

Synthetic lubricating greases are widely used for their innate ability to adhere to friction points.

They guarantee a mandatory hydrodynamic film of the centrifugation state. It also gives possible isolation from the friction zone.

A synthetic grease fitting is obtained directly from the chemical polymerization process, starting from the initial brick.

Synthetic grease can have these 5 peculiarities:

• Polyalphaolefinic oils (PAO)
• Polyalcheglycol oils (PAG)
• Foreign oils, diesters, and polyesters (EST)
• Silicone oils (SIL)
• Fluorinated oils (PFPE).

How to Select the Most Useful Grease for Ball Joints? [Buying Guide]

Before getting into details of the facts, you need to consider let’s stop for a moment. The facts we are going to tell you are universal. That means most of them are suitable for any ball joint grease type. Hopefully, you know the types. If not, then do not worry. We will tell you as you read further.

Here are the facts you should consider before buying grease for ball joints.

1. Components

First, it is necessary to define the elements to be lubricated and the constraints of use to select the proper viscosity. All of these constraints will make it possible to choose the appropriate viscosity.

a. The type of thickener or soap

These thickeners provide the grease with the various properties that characterize it: high-performance resistance, water resistance, mechanical stability, grade consistency, resistance to heavy load, etc.

b. Additives

The additives make it possible to provide the grease with essential characteristics such as anti-wear, anti-corrosion, antioxidant, extreme pressure, etc.

2. Temperature resistance

We’ve mentioned it several times before. When considering grease for the ball joint, the temperature is crucial. If you own a vehicle in warmer places like Florida or Arizona, you will need grease with higher temperature resistance. Otherwise, low-quality grease with low resistance will melt and spill.

3. Waterproof

Waterproofing or water resistance is another fact you cannot miss. Water can wash away the grease and harm the joints and applications.

Check if the grease has a higher water resistance or not. Also, it keeps your ball joints in good shape.

4. Durability

 Putting grease on ball joints every now and then can be a real hassle. Now, the grease is manufactured to run for a long time. Once you put it, you don’t have to do it again in sooner time.

Also, durable greases save money as stroke can run time after time.

Recommended Reading:

We must remember one more little thing. Most of the time, the car dashboard breaks accidentally or scratches badly. We can use Car Dashboard Glue and repair the broken part at home very quickly.

FAQ

1. What Type of Grease for Ball Joints and Tie Rods?

There are different types of greases like silicone grease, chassis grease, tacky grease, Lithium based grease, etc. Now, according to your need, you can choose any of them. Try to use good quality new grease, and avoid old grease.

Type LB is the best option as Ball Joints and ties rod end grease. It is also suitable for control arm shafts and U-joints.

2. How Much Grease to Put in Ball Joint?

Well, there is nothing as too much in greasing. You should put such an amount of grease in the ball joint that the previous grease comes off. Also, remember to grease the ball joint twice a year.

3. What Kind of Grease Do I Use for Ball Joints?

Not all types of grease are suitable for the ball joints. For them, the best kind would be Heavy-duty synthetic, Lithium, or marine grease. They are specialized in automotive equipment.

4. What Is the Best Thickener Used in The Grease?

Lithium-complex-based thickeners are always preferable in grease. Lithium 12-hydroxy stearate is the one that can be considered the best based on popularity. They are higher in lubricity, water-resistance and also have higher dropping points.

5. Is Moly Grease Good for Ball Joints?

Moly grease is usually used for equipment where metal-to-metal slide occurs under high pressure. It is good enough for ball joints, CV joints, and tie rod ends.

Final Thought

Greasing ball joints is something that cannot and should not be avoided. But choosing the right one for the primary purpose can be very confusing. That’s why we researched the products available in the market.

Finally, we came up with our list of best grease so that you can choose easily. Also, go through our guide carefully to understand all the aspects and clear any confusion. Remember, the wrong choice can hamper your favorite vehicle for good.