Have you ever stuck in the road with a non-running car? If you faced, then you know well how much terrible the situation is.
You need a tow dolly to face this awkward situation. But using or loading a non-running car with a tow dolly is a challenging job. Do you know how to use it properly?
If you don't know, then it's ok. Most people don't know the proper process; they find it difficult. So they hire an expert for this job, and it cost well.
Here we will share our experience of how to load a non-running car on a tow dolly comfortably. We hope, next time, you will overcome the situation comfortably with a tow dolly by yourself.
Let's move on.
What is The Tow Dolly?
- 1 What is The Tow Dolly?
- 2 Factors that You Must Know Before Loading the Car
- 3 Best Way to Load your Non-Running Car on a Tow Dolly?
- 4 Precautions
- 5 Final Thoughts
The tow dolly is a two-wheel trailer to lift the front side of the vehicle. The rear wheels remain towed to the car with a car dolly. It is a very important tool for car owners.
Sometimes cars have ruined at the middle road. Then you need this tool to carry the vehicle.
Factors that You Must Know Before Loading the Car
You must know some factors before using the tow dolly. At first, consider your car model. All tow dolly is not perfect for all types of cars. If you buy a car dolly for your personal use, then purchase a dedicated dolly.
If you take service or take tow dolly from your friend, ensure it can take your carload. If the car is overweight, then replace your tow dolly with a more capable one.
Besides, check which type of dolly suits your vehicle most from U haul tow dolly, front-wheel dolly, and central pivot dolly.
Best Way to Load your Non-Running Car on a Tow Dolly?
Before loading the car on a dolly, you must maintain some process. However, after reading the following guide, you will learn the process. So, let's get started:
1. Park Your Vehicle at Right Place
First, you need to ensure that you park your car in the parking zone. Then bring your dolly. Make sure it is appropriate and suits your vehicle.
2. Set Up Your Car Dolly
Now, set up your car dolly. At first, extend the ramps. However, these ramps stayed on the car dolly's rear side. Then free the tire straps carefully. Now, you can easily place the ramps. You have to put this in the flat position.
Besides, you have to be more careful in setting up your car dolly. Careful; any mistake can damage your vehicle.
3. Load Your Car In The Dolly
It is sensitive work. First, you need to position your car behind the car tow dolly. Check twice and ensure that no one is standing between the car and car dolly.
Start your vehicle loading slowly. First, try to up your car in dolly ramps. Now check your vehicle is situated at the center or not. If this is ok, lock your car wheel with the dolly.
4. Secure Your Vehicle
Put the straps on the upper side. Check again that straps are situated at the center of the tire. After that, root through the slots that ratchet spool correctly. You must ensure six inches straps pass through the ratchet spool.
Now tighten and fold tow dolly. Confirm it for compatibility with vehicle tires. Besides, you can use a safety chain for a fast whole structure process for your vehicle. On the other hand, you can use S hooks after a complete security process.
5. End Loading Process And Take A Test Drive
Secure your tow ramps position. You must check everything to secure your vehicle. If everything is ok, go to a test drive carefully. Drive your cars with left-right turns for checking. Recheck everything to ensure there is no problem. However, if you find any mistake, then take it to the service center.
If you use the tow dolly, make sure:
1. Before loading a vehicle, always check the vehicle tire pressure,
2. Recheck your dolly to ensure that pins and chains are secure and tightened,
3. Also, make sure that no storage is held at the back of your vehicle,
4. You should have ready straps, ratchets, brake lights, and many more things that you need.
If you go through the process, you know how to load a non-running car using a tow dolly. It is sensitive work; make sure you follow every step correctly. A wrong work can damage your vehicle. If you have any questions regarding this work, put your question in the comment box.